(FWA 0070) Installation photographs from our full-colour instruction book are shown below.
The kit also includes step-by-step instructions and a schematic wiring diagram. |
Under the Bonnet
1. The Bonnet Sensor
|
2. Mounting the Siren
 |
Inside the Van
|
|
3. Fix the template.
|
4. LED fitted.
 |
The Rear Door Pin Switch
5. Pin switch fitted.
|
The Sliding Door/The Passenger Door Pin Switch
6. Location of Pin Switch for Side-Loading Door
Contact Plate
Pin Switch |
7. Pin Switch Fitted to be Operated by Passenger's Door.
|
Main Electrical Connections
8. Ford Connector unclipped from top of wheel arch. Pin Configuration
|
9. Bulkhead Behind the Glove Box.
|
10. Harness Fitted.
 |
11. Connection to the Ford CDL Module
Remove Factory Harness and Plug in Green Connector from Wolf Harness
|
12. Alarm Module Mounting
|
13. Microphone Location
|
14. Sensor Mounting
|
| The alarm is now ready for testing! |
|
